This section of the site will showcase the experimental bead melts we have made. These experiments are based on archaeological evidence, and are targeted to recreate the techniques the Viking Era Norse used to make beads.
On the menu to the left are
We get a number of emails asking why we make some of the choices that we do in our experiments. This can best be explained by providing a background on what we are doing and why. This section of our website records a sequence of experiments designed to bring us to an understanding of at least one method the Viking Era Norse could have used to produce beads. There is, of course, no way for us to prove that the method we eventually produce was used. Our goal is to get a method that: 1. reliably produces beads, 2. uses equipment that would have been available and, 3. that matches the archaeological record that we have with regards to beads produced, furnace, surrounding area layout, and materials.
Our research on artefact remains is summarized on the archaeology page. As it shows there are a few clay bases, some with clay/ceramic on them, and a number of tools. This may indicate that the smelter was made of rock which was taken away to be reused, or that it was made of cobb (clay / sand / straw mixes). Within these constraints, there can further be a range of sizes - the size of the base being all that can be ascertained from the remains.
At these sites we find charcoal remains, and debris (the left over bits that come from making beads).
We are coming to understand the physical relationship between glass, furnace, and charcoal. The layout of the furnace is effected by the nature of the material used to construct it, and it's specific use. Air volume drives the physical environment inside the furnace. Unfortunately, no actual air delivery system survives from the dark ages, but it is a reasonable assumption that some kind of forced air bellows system must have been used.
Extrapolating from blacksmith's work, this implies that they used a bellows powered forced air and charcoal system to melt the glass so that it could be shaped into beads.
We often get teased about our use of mechanical blowers rather than bellows although we have used various bellows systems many times in our iron and bead experiments. Using a mechanical blower allows us to fix the amount of air moving into the furnace without having to worry about operator fatigue, different operators producing different levels of air, the changeover between operators causing a cooling, and so on. We have experienced all of these problems from time to time when we used bellows. Since we have worked with bellows in the past successfully the use of a blower simply allows us to focus our scarce resources on more interesting problems and we certainly aren't short of those. It is worth mentioning that this sort of experiment is often more difficult than people realize, and often in very subtle ways. The bellows is a good example of this sort of complexity. To begin with, there are no surviving examples of norse bellows. This means that before we can use them we need to figure out what they looked like. There are, thankfully, a couple of carvings of bellows, although these are blacksmith's, not iron smelting or bead making, equipment. Both carvings are very simplistic but it is possible to see that they were using a two lobed bellows like you will see in our pages. They do not, however, come with good measurements. Since the size of the bellows directly affects the amount of air produced this is an important question. Many tiny things about a bellows (hinge method, height off ground, total lift on the lobe, size of air input, size of air output) can all impact the pressure and amount of air delivered to the furnace.
The list of questions we are exploring, will of course change from time to time as we answer some of them and others occur. The following are the questions for which we are seeking to find answers. Where answers are known we have moved the question over to the Q&A page.
Future years will likely involve the following experiments.
If you have any questions about our bead making
experiments please email us.